6.7m Alloy Planing Monohull 'Bay Boat'

6.7m Alloy Planing Monohull 'Bay Boat'

6.7m 'Bay Boat'

This design was a commission that came from an experienced fisherman with a passion for alloy boats.

Primarily intended for operating on relatively sheltered waters, the freeboard is reasonably low and the deadrise a little less than what might be considered optimal for rougher offshore conditions.

The hull will be very efficient to push along on the plane and cruise comfortably with it's electric trolling motor.

A soft or rigid canopy could be added over the console should it be required. 

Principal Particulars
LOA 6.71 m
LWL 0 m
Displacement 1310 kg
Draft 0.28 m
Drive Type Inboard
Survey MSA
Construction Aluminium
Design Status Published
Design Number 145
Hull Form Monohull
Design Type Stock

Do you like what you see?

Contact RHYD about this design